2 4 0 T U R B O . C O M
D A V E ' S   V O L V O   P A G E

Smiths Gauge Face Overlays for Non-Volvo
Return to Main Gauge Face Page                 Updated: May 18, 2020        CONTACT

Jaguar Project
Morgan Project
Triumph Project

Installation


JAGUAR PROJECT
In response to some requests I have begun developing some new overlays for restoring Smiths gauges. These overlays are made in the same manner as other overlays in my other gauge overlay pages.  All overlays are printed on vinyl with a self-adhesive back and a matte (non-glare) UV resistant finish.  Applying a vinyl overlay can be an inexpensive way of restoring a gauge that otherwise might never be restored.

More faces can be added.  If you need a Smiths face not shown, have questions or if you can help contribute, please email.

1963-64 JAGUAR E-TYPE
This customer needed an oil pressure gauge. He had a Smiths donor gauge with an incorrect rear face plate, which was to be converted (FIRST photo).  I developed the overlay to match the correct gauge based on information supplied by the customer (SECOND photo).  The customer then installed the overlay on the rear face plate. The LAST photo shows this installation.  The front face plate was not restored at this time, however it can now be done as well (CLICK HERE).

Overlay installation information may be found below or CLICK HERE.



Overlays for Smiths Jaguar.
More faces can be added.  If you need a face not shown, please email.

Smiths FRONT overlay for FUEL gauge.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE


Smiths FRONT overlay for Oil Pressure gauge.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE



Smiths REAR overlay for 100 PSI Oil Pressure gauge.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths FRONT overlay for WATER gauge.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE



Smiths (LUCAS) FRONT overlay for AMPS gauge.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE



Smiths (LUCAS) REAR overlay for AMPS gauge.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE



MORGAN PROJECT
A customer with a 1966 Morgan 4/4 was in need of a new face for a temperature gauge. Since a temp sender for the Morgan gauge is NLA, his plan was to place the overlays on a Triumph or MG/B gauge using a senders that is available.

More faces can be added.  If you need a Smiths face not shown, have questions or if you can help contribute, please email.

1966 MORGAN 4/4
The font style on this gauge is different from other Smiths gauges on this page. Also this temp gauge has two limiting pins, which can be seen better in the third photo below. The restoration overlays below are available with the holes for these pins or without the holes. Limiting pins do NOT need to be removed to install an overlay. The overlay without holes for the pins is offered in case you want to install it on a temp gauge without limiting pins.
   

Overlay installation information may be found below or CLICK HERE.


Overlays for Smiths Morgan.
More faces can be added.  If you need a face not shown, please email.

Smiths FRONT overlay for TEMP gauge.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for TEMP gauge (with limiting pin holes).
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for TEMP gauge (WITHOUT limiting pins).
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




TRIUMPH PROJECT
In response to requests I have begun developing some new overlays for restoring Smiths gauges.
These overlays are made in the same manner as other overlays in my face other gauge overlay pages.  All overlays are printed on vinyl with a self-adhesive back and a matte (non-glare) UV resistant finish.  Applying a vinyl overlay can be an inexpensive way of restoring a gauge that otherwise might never be restored.

More faces can be added.  If you need a Smiths face not shown, have questions or if you can help contribute, please email.


1968 - 1972 TRIUMPH
Original and unrestored face plates are shown here. Face plates were provided by a customer so I was able to precisely design the below overlays.




1973 - 1976 TRIUMPH
Original and unrestored face plates are shown here. Face plates were provided by a customer so I was able to precisely design the below overlays.


INSTALLATION EXAMPLES
Here is a photo sent by a customer.


Overlay installation information may be found below or CLICK HERE.



Overlays for Smiths Triumph 1968-72.
More faces can be added.  If you need a face not shown, please email.

Smiths FRONT overlay for TEMP 1968-72 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for TEMP 1968-72 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths FRONT overlay for OIL 1968-72 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for OIL 1968-72 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths FRONT overlay for FUEL 1968-72 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for FUEL 1968-72 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths (Lucas) FRONT overlay for AMPS 1968-72 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths (Lucas) REAR overlay for AMPS 1968-72 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE



Overlays for Smiths Triumph 1973-76.
More faces can be added.  If you need face not shown, please email.

Smiths FRONT overlay for TEMP 1973-76 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for TEMP 1973-76 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths FRONT overlay for OIL 1973-76 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for OIL 1973-76 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths FRONT overlay for FUEL 1973-76 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for FUEL 1973-76 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths FRONT overlay for VOLTS 1973-76 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




Smiths REAR overlay for VOLTS 1973-76 Triumph.
Order Quantity: Type:
You may enter special info here if needed:
When done shopping, please proceed to Shipping:  CLICK HERE




INSTALLATION INFORMATION
The below information will offer some general information on how these overlays work. At this time I do not have specific instructions for disassembling the above Smiths gauges, however I have created disassembly instructions for other gauges. Those are listed below.  They should help with your general understanding of how overlays will work for these gauges.

Adhesion Promoter (or primer) is strongly recommended to improve the installation of gauge face overlays. If your car may be subjected to high interior temperatures (parked outside) the adhesive on the back of an overlay can soften and over time it can allow the edges to lift. Applying a little adhesion promoter on the face plate edges will greatly improve adhesion. For convenience, a cotton swab is included with this single use packet. This isn't some mythical snake-oil. It has been tested and works great.

Applying this stuff is easy. Dip the cotton swab in the liquid and smear the edges of the face plates where the overlay will be. It dries in seconds.  CAUTION: Using this stuff makes things stick very well, so be careful when placing the overlay down. It will be harder to lift and re-position if needed. Stuff like this can be found everywhere on-line.
ALSO AVAILABLE AT THE BOTTOM OF THIS PAGE
CLICK HERE


As you can see here, the surface condition of this Smiths front face plate is pretty poor.  It needs some cleaning before it can be used for this purpose, but aside from that, the below pictured overlay will demonstrate how a front vinyl overlay fits.  This overlay has been designed to cover all of the visible surface, except for a portion of the thin upper ring.  It has been found through testing that trying to cover more that this with vinyl would be extremely difficult and prone to failure during installation.  By limiting the coverage area to the overlay shown below, the chance of a successful restoration becomes excellent.  Cleaning and repainting the face plate that will be visible with an appropriate matte, flat or non-glare black paint before applying an overlay will help the overlay blend in. Once the covered face plate is installed in the gauge behind glass, it will be hard to see that it's not original.



Installing an overlay on the Smiths rear face plate is also a simple process. Of course cleaning the surface must be done before installing an overlay. A smooth surface will produce nice results. Painting the rear face plate will not be necessary. The overlay needs to be centered and the oval window lined up as accurately as possible with the overlay.  There are holes cut for viewing to help you line the overlay with the oval window. 
  


The final step is to use a sharp hobby knife to slowly and carefully trim the window. Since the overlay is installed, you can use the edge of the window as a guide for your knife.



Other Gauge Disassembly or Overlay
Installation Guide PDF Files.

These installation guides were made fore Volvo gauges, but they will offer a good deal of guidance if you need it.

Volvo 1800 Smiths Gauges
https://www.davebarton.com/pdf/1800faceinstall.pdf  (0.4mb PDF)
Volvo 240 52 mm VDO Gauges
https://www.davebarton.com/pdf/52mmfaceinstall.pdf   (0.5mb PDF)
Volvo 240 VDO R-Sport Gauges
https://www.davebarton.com/pdf/240FaceInstallR-Sportgauges.pdf   (0.4mb PDF)

If you need any face overlay installation or gauge restoration services, I can recommend Roger at RP Rsports. His contact information may be found at

https://www.davebarton.com/coolvolvoproducts.html#rprsports






Adhesion Promoter (or primer) is strongly recommended to improve the installation of gauge face overlays. If your car may be subjected to high interior temperatures (parked outside) the adhesive on the back of an overlay can soften and over time it can allow the edges to lift. Applying a little adhesion promoter on the face plate edges will greatly improve adhesion. For convenience, a cotton swab is included with this single use packet. This isn't some mythical snake-oil. It has been tested and works great.

Applying this stuff is easy. Dip the cotton swab in the liquid and smear the edges of the face plates where the overlay will be. It dries in seconds.  CAUTION: Using this stuff makes things stick very well, so be careful when placing the overlay down. It will be harder to lift and re-position if needed. Stuff like this can be found everywhere on-line.



Order Quantity: Option:

To Check Out or View Cart, click below button.
When done shopping, please proceed to Shipping below.





USA Shipping Options for Gauge Face Overlays

             For USA Shipping (choose one of these options):

Shipping only needs to be added ONCE. Shipping cost is the same for one or multiple items.


View Cart or Check Out:




International Shipping Options for Gauge Face Overlays


For INTERNATIONAL Shipping (or choose one of these):


Shipping only needs to be added ONCE. Shipping cost is the same for one or multiple items.


View Cart or Check Out:




davebarton.com prancingmoose.com 240turbo.com Contact Us
Shopping Cart
Newly Added Items Cool Volvo Products Volvo Stickers Steering Wheel Emblems Prancing Moose Stickers
Volvo Body/Chassis Labels
Other Car (non-Volvo) Stickers
Volvo Wire Harnesses
Harness Parts and Connectors
Volvo Coil Repair Harnesses
Volvo Relays
240 Rubber Window Scrapers
740/940 Window Scrapers
740 Turbo/Boost Faces
Volvo Gauge Faces
Adjustable Voltage Regulators
Horn Buttons
740 Odometer Repair
850 Odometer Repair
240 Odometer Repair
240 Hydraulic Clutch Page
Classic Auto Air AC Project 4 Speed Fan Controller Project
Limited Slip Read Ends 240 Mods and Fixes Page
Group A Racing Page
Electric Fan Page and Diagrams
Tropical Fan Clutches
Modified 240 Favorites Page
Side Marker Lights
SoCal Salvage Yards
Unleaded Racing Fuel at the PUMP
B26FT Stroker Page
245 Spec Page
Volvo Vacuum Diagrams
Used Stuff
240 Big Brakes Page
R-Sport Apparel
Prancing Moose Apparel
Favorite Links Page
Volvo Meet Photos Texas Volvo Meets and Events Mojave Road Map Page 240 Black Door Vinyl
Ordering Instructions Policies Payments Shipping Returns
Online Payments