The above set is an original 5
gauge Rallye cluster for the 140. "VOLVO RALLYE" is shown on the
bottoms of the speedo
and tach.
The above set is a 4 gauge 142
GT cluster. "VOLVO" is shown on the bottoms of the gauges.
I
offer original and custom
gauge face overlays for these sets.
Original gauge sets are designed to restore these
gauges. Custom gauge sets will change them.
All
faces are printed with UV
resistant ink and have a Satin non-glare
laminated UV film over the front to protect the
face from exposure. They will not fade.
These faces are printed on professional grade vinyl with peel and stick
adhesive on
the back.
| These
instructions are specifically for 240 R-Sport gauges,
however the gauges in these 140 clusters are very similar, so these instructions will help. Installation Instructions: http://www.davebarton.com/pdf/240FaceInstallR-Sportgauges.pdf (0.4 mb PDF) |
Below
Photos 140
5-Gauge Rallye Blackface
Original Restoration Sets
These
sets are intended to restore the faces back to a new appearance.
Available with a 130 MPH or 200
kmh speedometer.
CLICK ON PHOTO FOR HIGHER RES
Custom Set - Yellow Text
Available with a 130 MPH or 200 kmh speedometer.
CLICK ON PHOTO FOR HIGHER RES
Below Photos 140 5-Gauge Rallye Blackface
Custom Set - Rallye Style Yellow Text
Created in the same style as the R-Sport Rallye 240 faces..
Available with a 130 MPH or 200 kmh speedometer.
CLICK ON PHOTO FOR HIGHER RES
Below Photo 140 4-Gauge GT Blackface
This set is intended to restore the faces back to a new appearance.
It is available with a 130 MPH or 200 kmh speedometer.
CLICK ON PHOTO FOR HIGHER RES
Below Photo 140 4-Gauge GT Custom Whiteface
This set is intended to create a high quality white face set.
It is available with a 130 MPH or 200 kmh speedometer.
CLICK ON PHOTO FOR HIGHER RES
 Adhesion Promoter is recommended to
improve the installtion of gauge face overlays. It is not needed in all
situations, however if your car may be subjected to high interior
temperatures frequently (parked outside) or many times over the years,
the adhesive on the backs of overlays can soften and allow the edges to
lift. Applying a little of this before installation on the faceplate
edges will greatly improve adhesion. For convenience, a cotton swab is
included. This isn't some mythical snake-oil. It has been tested and
works great.Applying this stuff is easy. Dip the cotton swab in the liquid and smear the edges of the face plates where the overlays will be. It dries in seconds. CAUTION: Using this stuff makes things stick very well, so be careful when placing the overlay down. It will be harder to lift and re-position. To Check Out or View Cart, click below button. |
| These
instructions are specifically for 240 R-Sport gauges,
however the gauges in these 140 clusters are very similar, so these instructions will help. Installation Instructions: http://www.davebarton.com/pdf/240FaceInstallR-Sportgauges.pdf (0.4 mb PDF) |
